Detail Hasil Pencarian

Judul :
Pengujian Puntir Poros Komposit Serat Gelas Berlapis Simetri Dengan Lapisan Bersudut ( Angle Ply) Torsion Testing Of symetrical Anegel Ply Laminated Glass/ Epoxy Composite Shaft
Pengarang : Heru Santoso B. Rochardjo' dan Edi Wiyanto2
Jurnal : Jurnal Mesin dan Industri 2004, I(3)
Tahun : 2004
Summary / Kata Kunci : Glass/epoxy composite shafts were tested under torsion loading. The material which was made by filament winding method is simetric angle-ply laminate with 4 plies. The fiber orientations q, were varied from 15 degrees to 75 degrees to the tube axis, to make laminated composite with [q,-q]3structure. It was shown from the experimental result, that the shear strength of the shaft is agree better with Tsai-Hill failure criteria than with the maximum stress criteria. The shear stiffness, however, is below the calculated value.

Keywords: glass/epoxy, composite, filament winding, laminate.
File : Login Required
     
Sitasi  
    (tidak ada sitasi)
     
Referensi    
1.   About Wafa M. N., Hamdi, A. and El Midany,, "Combined Bending and Torsional Fatigue of Woven Roving GRP, 1977
2.   Billmeye Fred W., "Text Book of Polymer Science",, 1994
3.   E. D. Harmer , G. E. Troxell and George F. W. H.,, "The Testing of Engineering Materials",, 1964
4.   F. R. Gibson ,, "Principle of Composit Materials Mechanics",, 1994
5.   G. H.Dietz A. ,, "Composite Material Hand Book",, 1978
6.   G.R.Budynas ,, "Advanced Strength and applied Stess Analysis",, 1977
7.   R. Jones M., Mechanic of Composite Materi, 1975
     
     
Inherent UGM
Gedung Pusat UGM
Lt 3 Sayap Utara
Bulaksumur
Telp. (0274) 564416